Linseed oil paint on plaster

Previously, it was very common to use oil paint as an exterior paint. The term oil paint refers to, besides linseed oil colours, composition colour / tempera paints, which all also consist of linseed oil paint, which have been combined with watery glue bound. But the classic linseed oil paint was used as exterior paint.

Since the knowledge of oil paint as an exterior paint had been as good as lost, the Center for Bygningsbevaring Raadvad in Denmark (Center for the preservation of old buildings in Raadvad) prepared a guide on how to use linseed oil paint as exterior paint. This technique I still practiced today in Sweden, England, and the Netherlands regularly. The guide was created based on the experiences of these countries.

linseed oil paste on plasterlinseed oil inks are not alkali-resistant. That means the colour would be broken down by the base materials or even destroyed. Linseed oil colours "saponify" or “soap-like” and lose both strength and cohesiveness. Although this is also an advantage, aesthetically and structurally, this weathering process should not take place too quickly. Studies of old paint layers on historical buildings have shown that a new façade or exterior treatment was necessary approximately every 8-10 years. After the minimum of 8 years has passed the paint layered has been weathered enough and therefore easier to remove in order to prepare the surface for a new coat. Nevertheless, it is still important to effectively "isolate" the linseed oil and free it from base materials in the plaster with the use of a primer.

As with any paint treatment, the ground surface must be treated with linseed oil before it can be painted. Instructions for this procedure can be found in old technical manuals or even instructions. Many materials, such as white lead may no longer be used today because of their harmful effects.

For example, if the lime content in plaster is neutralized with fluosilicate, then use warm linseed oil to prime the masonry with warm linseed oil, which has been heavily diluted with turpentine prior to use would be extremely dangerous and harmful. When applied to such large surface areas, it would be extremely harmful to one’s health.

Today, it is much more viable and likely that one would work with environmentally sustainable products that are not harmful or health threatening. Therefore, only primers which do not contain Fluat, white lead or turpentine can be considered.

Smaller areas can be very well isolated with shellac. It is dense and free of toxins.

Another method would be to wait with the linseed oil paint, until the lime or other hydraulic lime plaster is completely carbonized.

Newer plasters can be checked with the chemical substance phenolphthalein to see whether they are carbonized. If phenolphthalein turns reddish purple when applied, then the plaster is not carbonized. It would be advised to wait before painting. Usually at least half a year by a new layer of plaster.

Linseed oil paint for outdoor use should consist of boiled linseed oil and pigment paste consisting of pigments, which have been well rubbed or processed on a three-roll mill. Linseed oil paint can, like no other material, penetrate well and deep into the pores of the treated surface. Linseed oil paints do not dry by evaporation or the like, but by a chemical process in which the linseed oil absorbs the oxygen from the air. During this oxidation process linseed oil colours increase in "volume" and "presses" itself formally into the cavities of the surface. This process allows linseed to adhere to the surface very well. If linseed oil paint is applied on too thick, this will result in a wrinkled surface under which the underlying linseed oil cannot cure or dry, as the oxygen can no longer reach the surface.

Painting the exterior or facade with linseed oil paints will make it appear shiny in the beginning. Over time, the gloss level decreases and the surface is matt and have a beautiful pastel like appearance. Since the linseed oil paint weathered slowly, the rain seems to the surface clean as it naturally removes dirt from the surface.

Before applying linseed oil paint to the exterior structure, the surface must be completely tied. New plaster work and new brickwork should be at least one year old. Newly plastered masonry at least half a year old before a linseed oil paint can be applied. The masonry must be dry and may not have any permanently damp areas.

Newly constructed masonry can only be painted with linseed oil paint when all calcareous materials are fully bonded. This should take on average approximately 1 - 1 1⁄2 years.

Older buildings with a new plaster layer must cure for 1 1⁄2 - 2 months, before they can be painted with linseed oil. The waiting time depends on the thickness of the plaster, the plaster material used as well as the time of year.

If older buildings still have an intact, old plaster, they can be readily painted with linseed oil paint. Linseed oil will not adhere on masonry that is permanently moist or on moist spots. Smaller plaster repairs should dry for 3-4 weeks.

The surface to be painted should be completely dry and not exceed 18% residual moisture at the time of repainting.




The environmentally friendly wall paint TEMPERA BASIS

tempera wall paint colourful wallpaper, colourful wall colours in all shades and various coatings to spruce up furniture. The selection in hardware stores seems to be unbelievably large. Unfortunately, the use of these materials result in the release of thousands of tons of solvents into the environment per year when dealing with brushes and sprays. Volatile substances and other harmful substances can evaporate over a longer period in the air and cause, for example, allergic skin reactions, even fatigue and headaches. There are also hundreds of other chemicals in these other products. Their effects on the environment and our own personal health are often not even known to the most skilled professionals. (Source: Federal Environment Agency brochure: healthy and environmentally friendly renovation Page 2, 2012)

Tempera paint was used for centuries in all households. This colour brings with it all the characteristics a good paint needs. If you are in search of a breathable paint which can be well tolerated, Tempera paint is a good choice..


The linseed oil strengthens the glue-bound distemper making it easy to remove any spots or blemishes with a damp lint-free cloth. It also makes it unnecessary to wash the glue-bound distemper before adding a new coat of paint. Tempera paint is incredibly productive. Diluted with water, it creates 1L tempera paint to cover an area of 15sqm. It covers well, smells good and is also very durable. Depending on the surface in question, it may require 1-2 coats.

living room painted with tempera paintThe oil is dispersed through the emulsion with the glue-bound distemper into many small droplets and thereby significantly shortening the drying times. The water content in the paint evaporates relatively quickly and the surface can be painted a second time over after half an hour to a maximum of two hours after the first coat. Here, the percentage of oil needs longer to cure, but this process is less visible. Unlike a pure linseed oil paint, a tempera paint, if incorrectly applied cause the surface to form wrinkles or even tear. Linseed oil increases in volume during the drying or curing. Applying linseed oil colours on too thick may result in wrinkles of the surface and prevent the oxidation process from taking place in the lower layers. The lower layer remains soft as it is unable to dry. In Tempera paints the linseed portion expands as well, but, in this case, it takes the place that the evaporated molecules have left behind. Tempera paints can be diluted with water or oil.

Tempera and their ingredients

The term is Latin Tempera origin and means "mix". Today the term emulsion paint is more commonly use to describe the traditional “tempera paints.” Emulsion paints can be found in many colours today such as "plastic colours" and even including industrially produced colours. The term composition colour is used when referring to glue-bound distemper s which are mixed without oil. The technical term Tempera contrast means the lime oil emulsion without "plastic materials."

Our Tempera paint is a classic and natural emulsion paint. It consists of linseed oil, pigment, cellulose paste, and a preservative.

Our Tempera paint contains the preservative sodium benzoate. It is the sodium salt of benzoic acid. It is similar to this acid, and acts similar to the preservative found naturally in blueberries, cranberries and other fruits. Even in honey, yogurt, sour milk and cheese. Sodium benzoate is a preservative which is widely used in the food industry. However, the preservative used in paint is prepared synthetically.

Other than the preservative being synthetically produced, the paint consisted entirely of natural materials. Sodium benzoate can trigger by consumption a large number of allergies. However, the paint is not to be consumed. Therefore there is no danger.

 Tempera Wandfarbe




website security

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.